Huawei Firmware HG658b: Tips and Tricks for Troubleshooting and Maintenance
Huawei Firmware HG658b: A Review of Features, Specifications, and Performance
If you are looking for a reliable, fast, and easy-to-use router for your home or office network, you might want to consider Huawei Firmware HG658b. This router model from Huawei is designed to provide high-speed internet access, wireless connectivity, and network security for various devices. In this article, we will review the features, specifications, and performance of Huawei Firmware HG658b, as well as how to set up, configure, update, and maintain it. We will also compare it with other routers in the market and give you our recommendation.
Huawei Firmware Hg658b
What is Huawei Firmware HG658b?
A brief introduction to Huawei Firmware HG658b
Huawei Firmware HG658b is a home gateway or router that supports both wired and wireless connections. It can connect to the internet through an ADSL or VDSL line, or through an Ethernet cable from a modem or another router. It can also create a Wi-Fi network that allows multiple devices to access the internet wirelessly. It supports dual-band Wi-Fi (2.4 GHz and 5 GHz), which can offer faster speeds and less interference than single-band Wi-Fi. It also supports Wi-Fi Protected Setup (WPS), which simplifies the process of connecting devices to the Wi-Fi network.
The main features and specifications of Huawei Firmware HG658b
Some of the main features and specifications of Huawei Firmware HG658b are:
Dimensions: 176 mm x 138.5 mm x 32 mm
Weight: About 280 g
Power supply: AC 100 V 240 V, DC 12 V/1 A
Ports: One ADSL/VDSL port, four LAN ports (one can be used as a WAN port), one USB port, one WPS button, one reset button, one power button
Wi-Fi standards: IEEE 802.11a/b/g/n/ac
Wi-Fi frequency bands: 2.4 GHz and 5 GHz
Wi-Fi transmission rate: Up to 300 Mbps on 2.4 GHz band, up to 867 Mbps on 5 GHz band
Wi-Fi encryption modes: WPA/WPA2 PSK hybrid, WPA2 PSK / WPA3 SAE hybrid (not supported on some routers), WPA2 PSK , no encryption (None)
Firmware version: V100R001C36B020 (latest as of June 2023)
How to set up and configure Huawei Firmware HG658b?
How to connect Huawei Firmware HG658b to the internet and other devices
To connect Huawei Firmware HG658b to the internet and other devices, you need to follow these steps:
Connect the power adapter to the power port on the back of the router and plug it into a power socket. Turn on the router by pressing the power button.
Connect the ADSL/VDSL port on the back of the router to the wall socket using a telephone cable. If you have a modem or another router, you can connect one of the LAN ports on the back of the router to the WAN port on the modem or router using an Ethernet cable.
Connect your computer or other device to the router using either a Wi-Fi or a wired connection. To use a Wi-Fi connection, you need to find the Wi-Fi name (SSID) and password (WLAN Key) printed on the label at the bottom of the router. You can also use the WPS button to connect devices that support WPS. To use a wired connection, you need to connect an Ethernet cable from one of the LAN ports on the back of the router to your device.
After connecting your device to the router, you should be able to access the internet. You can also check the status of the router by looking at the indicators on the front panel. The indicators show the following information:
Indicator
Status
Description
Power
On
The router is powered on.
Power
Off
The router is powered off.
Internet
On
The router is connected to the internet.
Internet
Blinking
The router is sending or receiving data over the internet.
Internet
Off
The router is not connected to the internet.
Wi-Fi 2.4G/5G
On
The Wi-Fi network is enabled.
Wi-Fi 2.4G/5G
Blinking
The Wi-Fi network is sending or receiving data.
Wi-Fi 2.4G/5G
Off
The Wi-Fi network is disabled.
WPS
Blinking
The WPS function is active.
WPS
Off
The WPS function is inactive. dcd2dc6462